These briefs exert a compressive and support action on the abdomen to avoid that the tissues may yield and/or sog and to contain reducible inguinal hernias. In order to obtain the best functional results, a wide range of models offering a wide, comfortable and extremely flexible compression surface has been developed. Instead of pressing against the hemia, these briefs simply provide support to achieve better dynamic results: the support structures in the various models are shaped to run oblique compared to the waistband, which is lower in front and higher on the back. Includes two hernia pads left and right.

Lumbamed® facet is a medical lumbar support orthosis designed to relieve pain and stabilize the lower back, particularly targeting the facet joints of the lumbar spine. It is commonly prescribed for conditions involving facet joint osteoarthritis and other lumbar spine disorders.

Product features

• Targeted relief of the facet joints through effective reduction of lordosis
• Precise regulation of intra-abdominal pressure by means of the double 3-point strap system
• Holds the pelvis in an upright position
• Stabilises the lumbar spine area and the lumbosacral transition
• Contains Rigid material

Intended purpose

The Lumbamed facet operates using a combination of compressing knitted fabric, stabilising back rods and a pullstrap system which increases pressure. Abdominal compression and trunk musculature support relieve the strain on the lumbar column and thereby ease pain. The four crossover pull straps create a double three-point system with the dorsal points of application on the pelvis and in the upper lumbar spine area. Through individual pressure management, this three-point strap system increases the effect of reducing lordosis formation.

Basically, the orthotic can be worn all day long. The special cut in the groin area (Comfort Zone) ensures that the fit of the support is comfortable and just right. However, the length of time you wear it should depend on your needs.

Indications

• Facet joint osteoarthritis
• Intervertebral disc protrusion, prolapse
• Severe lumbar pain / ischialgia
• Lumbago
• Lumbago with iliosacral joint involvement
• Chronic pain in the lumbosacral area
• Spondylosis without slipping of vertebrae
• Spondylolisthesis
• Muscular imbalance
• Segmental instability
• Lumbar vertebral canal stenosis

Contraindications

• Circulatory disorders / sensory disturbances / open wounds in the area of the orthosis
• Respiratory diseases such as COPD
• Diseases or injuries of the skin in the area of use, especially with inflammatory symptoms (excessive warming, swelling or reddening)

Lower leg orthosis: Comfortable walker for ankle and foot injuries – in a lightweight shell construction -Short 

Indications

• Postoperative: Post ligament reconstruction and/or refixation, for treatment of soft tissue injuries and tendon injuries
• Conservative: Ligament lesions 2nd and 3rd grade, tenosynovitis
• Stable foot and joint fractures: metatarsal fracture, talus fracture, malleolar fracture

protect.CAT Walker is lower leg brace. The product is exclusively to be used for the orthotic fitting of the foot and only on unbroken skin.

Product features

• Air system with medial and lateral air passage around the ankle and up to the forefoot   
• Air pump and ventilation valve for easy handling     
• Easy adjustment and removal of toe protector     
• Flat, rounded sole for natural, stable gait
• Contains Rigid Material

Intended purpose

Safe and effective immobilisation

Four strap system

Ensures high stability and reduces anterior talar shift

Available as optional extra: heel wedge sets for Achilles’ tendon rupture

Goal setting

Open the belts, loosen the front shin from the inner shoe and finally take the inner shoe out of the Walker.

Open the leg and foot part of the inner shoe by loosening the Velcro fasteners. Ask the patient to place his foot and lower leg into the inner shoe. Make sure that the air chambers are empty!

Close the inner shoe and make sure that it is firmly fixed to the patient's leg. Align the inner shoe in such a way that the integrated pump is sitting in the middle and so that later it fits into the space provided in the shin.

Now ask the patient to place their foot in the half shell of the Walker. The lower leg and foot should positioned so that they fit exactly into the shell.

Check to see that the foot is properly set and positioned in the Walker.

Make sure that the patient's toes are not pushing against the toe protector. If necessary, the toe protector's position can be adjusted or it can be removed completely.

Now place the loose front shin onto the patient's shinbone and foot. Make sure that the pump and ventilator fit into the spaces provided.

Close the belts to stabilise the system. Start by closing the belt at the front and then close all the other belts one after another. The belts should fit tightly.

Extra material can be cut away.

Ask the patient to walk around in the orthosis to make sure that the Walker is sitting properly.

To tighten the Walker's fit, the air cushions can be filled using the pump system. Adding or letting out air can be operated using the valve. The padded pieces can be used as additional padding.

Download Instructions to Use ( instructions for use protect.CAT Walker)

Sof Roll Rayon Cast Padding provides maximum comfort and cushioning for casts, offering superior protection compared to other cast padding. Its 100% rayon material retains moisture and provides breathability for increased patient satisfaction.

Lower leg orthosis: Comfortable walker for ankle and foot injuries – in lightweight shell construction

Protection:
CAT Walker is a lower leg brace. The product is exclusively to be used for the orthotic fitting of the foot and only on unbroken skin.

Product Features

• Air system with medial and lateral air passage around the ankle and up to the forefoot   
• Air pump and ventilation valve for easy handling     
• Easy adjustment and removal of the toe protector     
• Flat, rounded sole for a natural, stable gait
• Contains Rigid Material

Intended purpose

• Safe and effective immobilization
• Four strap system
• Ensures high stability and reduces anterior talar shift
• Available as an optional extra: heel wedge sets for Achilles’ tendon rupture

Goal setting

• Open the belts, loosen the front shin from the inner shoe and finally take the inner shoe out of the Walker.
• Open the leg and foot part of the inner shoe by loosening the Velcro fasteners. Ask the patient to place his foot and lower leg into the inner shoe. Make sure that the air chambers are empty!
• Close the inner shoe and ensure it is firmly fixed to the patient's leg. Align the inner shoe in such a way that the integrated pump is sitting in the middle so that later it fits into the space provided in the shin.
• Now ask the patient to place their foot in the half shell of the Walker. The lower leg and foot should be positioned to fit exactly into the shell.
• Check to see that the foot is properly set and positioned in the Walker.
• Make sure that the patient's toes are not pushing against the toe protector. If necessary, the toe protector's position can be adjusted or it can be removed completely.
• Now place the loose front shin onto the patient's shinbone and foot. Make sure that the pump and ventilator fit into the spaces provided.
• Close the belts to stabilize the system. Start by closing the belt at the front and then close all the other belts one after another. The belts should fit tightly.
• Extra material can be cut away.

Ask the patient to walk around in the orthosis to make sure that the Walker is sitting properly.

To tighten the Walker's fit, the air cushions can be filled using the pump system. Adding or letting out air can be operated using the valve. The padded pieces can be used as additional padding.

Instruction Manual: Download Now

• Lightweight perforated foam material provides patient comfort
• Adjustable shoulder straps attach to hook receivable sling to ensure accurate fit
• Open or closed elbow designs
• Swathe attaches at any point on sling
• Available in pediatric and extra long versions
• Universal right/left

INDICATIONS

S/P glenohumeral acromioplasty; Surgical repairs of the rotator cuff; Anterior glenohumeral capsular reconstruction; Anterior dislocation of the G-H joint

Details

A lightweight, strong and durable casting tape that combines the benefits of a fiberglass casting tape with the handling ease of plaster. Available in 13 colors to meet patient preferences.

• Water-activated resin lets you control working time according to application needs
• High and early strength allows for weight bearing in 20 minutes and provides a durable cast with less chance of breakdown and the need for costly repairs or replacements
• Lightweight for easy mobility
• Stretches to conform well to contours for a more comfortable, better-fitting cast
• Porous weave allows the skin to breathe
• 7.5cm x 3.6m Casting Tape, White

Specifications Details

Dimensions and Classifications

• Protects distal phalanx and extends the DIP joint
• Open tip permits examination of fingertip and nailbed
• 1 Piece

Cervical Collar features:

• Provides firm, comfortable support, helping to relieve neck discomfort
• Its convenient hook and loop closure adjusts for proper fit
• Constructed of soft, porous cotton cover over polyfoam

• Lets you shower, bathe, swim or use a whirlpool
• Sheds water and feels comfortably dry in approximately 1 to 3 hours
• Suitable for use with all synthetic casting materials, such as 3M Scotchcast Plus Casting Tape
• For use in the treatment of musculoskeletal injuries
• 20 rolls per bag and 4 bags per case
• Completely immersible.
• Sheds water.
• Hypoallergenic.
• 20 each/box, 4 box/case
• SKU-WDP2

Proven to outperform other water resistant orthopedic products, this cast padding features Delta-Dry's unique patented technology that allows patients to shower, swim and bathe.

• Excellent conformability to body contours.
• Fast-drying.
• Simple and quick application.
• Long term water resistance.
• 12Roll/Box
• SKU-7344301

Proven to outperform other water resistant orthopedic products, this cast padding features Delta-Dry's unique patented technology that allows patients to shower, swim and bathe.

• Excellent conformability to body contours.
• Fast-drying.
• Simple and quick application.
• Long term water resistance.
• 12Roll/Box
• SKU-7344300

• Protects distal phalanx and extends the DIP joint
• Open tip permits examination of fingertip and nailbed
• 1 Piece

Introducing Pre-Cut Fibreglass Splints, a versatile and convenient solution for providing sturdy support and immobilization for bone fractures or injuries. Each box contains 4 pre-cut splints, making it easy to quickly provide essential care for patients. Trust our reliable, scientifically designed product for exceptional results.

Slab Dimensions: 7.5cm x 75cm, White, Plaster of Paris Slab, Extra Fast Setting 2 Minutes, Creamy Texture, Latex-Free, Gypsona® Plaster Slabs 7.5cm x 75cm (50 Splints per Box, 6 Boxes per Case)

FEATURES & BENEFITS Leno gauze for extra stability; Creamy texture; Low plaster loss; Central plastic core; Latex-Free

A lightweight, strong and durable casting tape that combines the benefits of a fiberglass casting tape with the handling ease of plaster. 

• Water-activated resin lets you control working time according to application needs
• High and early strength allows for weight bearing in 20 minutes and provides a durable cast with less chance of breakdown and the need for costly repairs or replacements
• Lightweight for easy mobility
• Stretches to conform well to contours for a more comfortable, better-fitting cast
• Porous weave allows the skin to breath
• 5m x 3.6m Casting Tape, White

Specifications Details

Dimensions and Classifications

A lightweight, strong and durable casting tape that combines the benefits of a fiberglass casting tape with the handling ease of plaster. Available in 13 colors to meet patient preferences.

• Water-activated resin lets you control working time according to application needs
• High and early strength allows for weight bearing in 20 minutes and provides a durable cast with less chance of breakdown and the need for costly repairs or replacements
• Lightweight for easy mobility
• Stretches to conform well to contours for a more comfortable, better fitting cast
• Porous weave allows the skin to breathe
• 10cm x 3.6m Casting Tape, White

Specifications Details

Dimensions and Classifications

The BSN Dynacast® Prelude Splinting System is a fiberglass splint designed to immobilize injuries like fractures or soft tissue damage. Each box contains 5 pre-cut splints, each measuring 30 cm x 10 cm.

Key Features:

• Easy to Use: Pre-cut shape saves time—no need to cut manually.

• Strong & Durable: Made from fiberglass for reliable support.

• Lightweight: More comfortable for patients compared to traditional plaster.

• Fast Drying: Sets quickly, reducing waiting time.

• Latex-Free: Safe for people with latex allergies.

• Customizable Fit: Can be trimmed or adjusted as needed.

Why Choose This System?

• Simple Application: No complicated steps—just add water to activate, mold, and let it set.

• Comfortable for Patients: Smooth edges and lightweight design.

• Cost-Effective: Reduces waste with pre-cut sizes and fast application.

This splinting system is ideal for both emergency rooms and clinics, making it a versatile choice for medical professionals.

• Protects distal phalanx and extends the DIP joint
• Open tip permits examination of fingertip and nailbed
• 1 Piece

Bag of 24 Rolls

• Specialist Cotton Blend Cast Padding has a unique micropleated design for excellent conformability, protection and ease of application without tucking or tearing
• Conformability - the micro pleated fibers fit every contour without slipping
• Cotton synthetic blend - the moisture from the casting material relaxes the crimped fibers resulting in a uniformly smooth surface
• The cotton/rayon blend is highly absorbent