Saline Solution IV

• Pfizer 0.9% Bacteriostatic Sodium Chloride Injection 10mL DIN 00037818
• Bacteriostatic Sodium Chloride Injection is supplied for its stated clinical application. Confirm the configuration, compatibility, and intended use before ordering.
• Product details
• • Product type: Sodium Chloride Injection
  • Manufacturer: Pfizer

Use according to the manufacturer's instructions and applicable procedure. Browse related Sodium Chloride Injection.

Pfizer Bacteriostatic Sodium Chloride Injection in Canada

Pfizer 0.9% Bacteriostatic Sodium Chloride Injection is a sterile solution for injection. Health Canada lists Pfizer Canada ULC as the manufacturer. The product is marketed under DIN 00037818.

The solution contains sodium chloride 9mg/mL, equivalent to 0.9% sodium chloride. Health Canada lists intramuscular, subcutaneous, and intravenous administration routes.

Pfizer describes bacteriostatic 0.9% Sodium Chloride Injection as a sterile, nonpyrogenic, isotonic solution. It contains water for injection and a bacteriostatic preservative. The preservative is benzyl alcohol.

This product is intended for parenteral use after adding medications that require dilution. It can also dissolve medications requiring an aqueous vehicle before injection.

Key Features

• • Pfizer Canada product
  • DIN: 00037818
  • 0.9% sodium chloride
  • Sodium chloride: 9mg/mL
  • 10mL vial format
  • Sterile solution
  • Nonpyrogenic solution
  • Isotonic formulation
  • Bacteriostatic preservative
  • Benzyl alcohol preservative
  • Multiple-dose container
  • Intended for parenteral medication preparation

Common Applications

Pfizer Bacteriostatic Sodium Chloride Injection 10mL is used as a diluent. It supports medications requiring dilution or dissolution before injection.

Health Canada lists the product for intramuscular, subcutaneous, and intravenous administration. Healthcare professionals should determine suitability based on the medication and clinical requirements.

The multiple-dose container allows repeated withdrawals when used according to applicable instructions. Pfizer specifies that the preparation is intended for parenteral use after appropriate medication addition.

Product Specifications

Specification	Details
Brand	Pfizer
Product	Bacteriostatic Sodium Chloride Injection USP
DIN	00037818
Concentration	0.9% / 9mg/mL
Volume	10mL
Dosage Form	Solution
Preservative	Benzyl alcohol
Container	Multiple-dose vial
Manufacturer	Pfizer Canada ULC
Routes Listed	IM, SC, IV

• The Pfizer 0.9% Bacteriostatic Sodium Chloride Injection 10mL is a pharmaceutical diluent for appropriate parenteral medication preparation. Always verify compatibility and follow the product monograph and professional clinical protocols before use. 

Details

• Sodium Chloride Injection
• USP
• 250 mL
• Approx mmoI/L : Na - 154  Cl- 154
  
• Approx mOsmol/L: 308 
  
• pH Value: 5.5
• VIAFLEX Plastic Container
• Contains PVC
• Contains DEHP
• Not made with Natural Rubber Latex
• 0.9% Sodium Concentration(NaCl)
• No Preservative
• Rx Only
• Brand: Baxter
• Category: Sodium Chloride IV Baxter

  Note: IV Saline Solutions are Packed with External Protection plastics bag. We verify the expiry date before shipment.

Intravenous fluid and electrolyte replenishment re-establishment. Per 100mL Sodium Chloride (NacL)  USP - 900 mg / Water for Injection USP

Lactated Ringer's Injection USP is sterile, nonpyrogenic and contains no bacteriostatic or antimicrobial agents. BBraun Lactated Ringer's Injection is intended for intravenous administration in a single dose container. This solution is indicated for use in adults and pediatric patients as a source of electrolytes and water for hydration.

Not made with natural rubber latex, PVC or DEHP.

Specific Gravity: 1.006

1000mL

SKU- L7500

B. Braun Lactated Ringer's Injection USP 1000mL is a sterile, nonpyrogenic intravenous solution. It is supplied in an EXCEL® IV Container. The product reference is L7500. It is intended for intravenous administration as a single-dose container. B. Braun indicates this solution for adults and pediatric patients as a source of electrolytes and water for hydration.

Lactated Ringer's Injection USP 1000mL

This Lactated Ringer's solution contains sodium chloride, sodium lactate, potassium chloride, and calcium chloride. Each 100 mL contains 0.6 g sodium chloride, 0.31 g sodium lactate, 0.03 g potassium chloride, and 0.02 g calcium chloride dihydrate. Water for Injection is used as the vehicle.

The solution has a calculated osmolarity of 275 mOsmol/L. Its labeled pH is 6.2, with an acceptable range of 6.0 to 7.5. Electrolyte concentrations include sodium 130 mEq/L, potassium 4 mEq/L, calcium 3 mEq/L, chloride 110 mEq/L, and lactate 28 mEq/L.

The B. Braun L7500 Lactated Ringer's Injection contains no bacteriostatic or antimicrobial agents. It is not made with natural rubber latex, PVC, or DEHP. The EXCEL® container provides a practical format for clinical fluid administration.

Product Features

• Brand: B. Braun
• Product: Lactated Ringer's Injection USP
• Volume: 1000 mL
• Reference: L7500
• Container: EXCEL® IV Container
• Route: Intravenous use
• Form: Sterile solution
• Nature: Nonpyrogenic
• Calculated Osmolarity: 275 mOsmol/L
• pH: 6.2 (6.0–7.5)
• Sodium: 130 mEq/L
• Potassium: 4 mEq/L
• Calcium: 3 mEq/L
• Chloride: 110 mEq/L
• Lactate: 28 mEq/L
• Latex: Not made with natural rubber latex
• PVC: Not made with PVC
• DEHP: Not made with DEHP
• Case Quantity: 12 containers
• Shelf Life: 30 months

B. Braun Lactated Ringer's Injection for Clinical Use

The Lactated Ringer's Injection USP 1000mL L7500 is intended for professional healthcare use. It provides water and electrolytes through intravenous administration. It should be administered according to the prescribing information and professional clinical judgment.

The current labeling states that the solution is for intravenous use only. It should be used only when the solution is clear and the container and seals remain intact. It should not be administered simultaneously with blood. The labeling also advises against using the product in series connections.

The product is supplied in a 1000 mL EXCEL® container. B. Braun lists 12 units per case and a 30-month shelf life for L7500. In Canada, the current labeling identifies DIN 01931636 and distribution by B. Braun of Canada, Ltd.

L7500 is an Rx product and should be administered only by qualified healthcare professionals according to applicable prescribing information.

Visit EmerDepot for more medicals supplies and healthcare accessories in Canada

Baxter 0.9% Sodium Chloride Irrigation USP, 1000 mL

Baxter 0.9% Sodium Chloride Irrigation USP is a sterile, non-pyrogenic solution supplied in a 1000 mL plastic pour bottle. This product is formulated for irrigation procedures, not for intravenous injection.

Product details

• 0.9% Sodium Chloride Irrigation USP
• 1000 mL plastic pour bottle
• Reference: JF7634 / JF7124
• Sterile and non-pyrogenic
• No preservative
• Not made with natural rubber latex
• Available as one bottle or a case of 12

For irrigation only. Do not inject. Use the product only under the direction of a qualified healthcare professional and according to its official instructions. Inspect the container before use and do not use if the closure or packaging is damaged. Shop other medical supplies.

Baxter 0.9% Sodium Chloride Injection USP, 1000 mL, JB1324

Baxter 0.9% Sodium Chloride Injection USP is a sterile, preservative-free intravenous solution in a 1000 mL VIAFLEX plastic container. Each 100 mL contains 900 mg sodium chloride in Water for Injection USP.

Product details

• 0.9% Sodium Chloride Injection USP
• 1000 mL VIAFLEX plastic container
• Reference: JB1324
• Approximate electrolytes: sodium 154 mmol/L and chloride 154 mmol/L
• Approximate osmolarity: 308 mOsmol/L
• No preservative
• Not made with natural rubber latex
• Available as one bag or a case of 12

This intravenous solution must be used by qualified healthcare professionals. Inspect the solution and container before use, and do not use when the bag, ports or seals are compromised. Consult the official Baxter labelling for complete indication, storage, compatibility and administration details. See related medical supplies.

B. Braun 0.9% Sodium Chloride Injection USP, 250 mL, L8002

B. Braun 0.9% Sodium Chloride Injection USP is a sterile, non-pyrogenic, isotonic solution supplied in a 250 mL EXCEL container. Each 100 mL contains 0.9 g sodium chloride in Water for Injection USP. The product is available as an individual bag or in a case of 24 bags.

Product details

• 0.9% Sodium Chloride Injection USP
• 250 mL EXCEL container
• Reference: L8002
• Sterile, non-pyrogenic and isotonic
• Not made with natural rubber latex, PVC or DEHP
• Available as one bag or a case of 24

This intravenous solution is intended for use by qualified healthcare professionals. Do not use when the solution is not clear or the container or seals are damaged. Refer to the official product labelling for complete use, storage, compatibility and safety information. See related medical supplies.

Braun 0.9% Sodium Chloride Injection USP in Canada

Braun 0.9% Sodium Chloride Injection USP 250mL is a sterile intravenous solution supplied in a B. Braun EXCEL® IV Container. The official B. Braun product listing identifies L8002 as the product code and reference number.

This solution contains 0.9% sodium chloride and is formulated as an isotonic intravenous fluid. B. Braun states that its Sodium Chloride Injections USP are sterile and nonpyrogenic. They contain no bacteriostatic or antimicrobial agents. The products are indicated for use in adults and pediatric patients as sources of electrolytes and water for hydration.

The 250mL EXCEL® IV Container provides a practical volume for appropriate intravenous fluid therapy and related clinical applications. B. Braun lists the L8002 container with a specific gravity of 1.006.

Key Features

• B. Braun 0.9% Sodium Chloride Injection USP
• Product code: L8002
• 250mL volume
• EXCEL® IV Container
• Sterile formulation
• Nonpyrogenic solution
• Isotonic intravenous solution
• Contains no bacteriostatic agents
• Contains no antimicrobial agents
• Not made with natural rubber latex
• Not made with PVC
• Not made with DEHP
• Specific gravity: 1.006
• 24 units per case

Intravenous Hydration and Electrolyte Support

B. Braun 0.9% Sodium Chloride Injection USP is intended for appropriate intravenous administration. The solution provides sodium and chloride electrolytes along with water for hydration. B. Braun identifies sodium chloride injections as intravenous solutions for adult and pediatric patients.

The L8002 250mL presentation is part of B. Braun's Sodium Chloride Injection product range. The range also includes 500mL and 1,000mL EXCEL® IV containers. This provides healthcare facilities with different volume options for applicable clinical requirements.

The EXCEL® IV Container is designed for use within appropriate infusion workflows. B. Braun provides manufacturer guidance for handling and spiking the container. Healthcare professionals should follow the applicable product instructions before administration.

Product Specifications

0.9% Sodium Chloride Injection USP is indicated for extracellular fluid replacement, treatment of metabolic alkalosis in the presence of fluid loss and mild sodium depletion.

Not made with natural rubber latex, PVC, or DEHP.

• Available in a PAB® bag or EXCEL® bag
• Facilitates inspection of admixtures
• Injections supplied in a PAB® bag do not require any overwrap

Baxter 0.9% Sodium Chloride Injection USP, 500 mL, JB1323

Baxter 0.9% Sodium Chloride Injection USP is a sterile, preservative-free intravenous solution in a 500 mL VIAFLEX plastic container. Each 100 mL contains 900 mg sodium chloride in Water for Injection USP.

Product details

• 0.9% Sodium Chloride Injection USP
• 500 mL VIAFLEX plastic container
• Reference: JB1323
• Approximate electrolytes: sodium 154 mmol/L and chloride 154 mmol/L
• Approximate osmolarity: 308 mOsmol/L
• No preservative
• Not made with natural rubber latex
• Available as one bag or a case of 24

This is an intravenous product for use by qualified healthcare professionals. Use only if the solution is clear and the bag and ports are intact. Refer to the official Baxter labelling for indications, storage, warnings, compatibility and administration information. Browse medical supplies.

Sterile 0.9% Sodium Chloride Irrigation Solution with Twist Top, 118 mL

This sterile 0.9% sodium chloride irrigation solution is supplied in a 118 mL bottle with a twist-top precision spray nozzle. The nozzle can be removed to use the bottle for pouring, as directed.

Product details

• 0.9% sodium chloride irrigation solution
• 118 mL bottle
• Sterile single-patient-use format
• Twist-top precision spray nozzle
• Spray nozzle can be removed for pour dispensing
• Reference: 48501N
• Available individually or in a case of 48

Use for irrigation or moistening only as directed by a qualified healthcare professional. Do not inject. Inspect the bottle before use and discard it after single-patient use. Browse medical supplies.

Baxter 0.9% Sodium Chloride Injection USP, 100 mL, JB1302

Baxter 0.9% Sodium Chloride Injection USP is a sterile, preservative-free intravenous solution supplied in a 100 mL container. This item is available in packets of four bags or cases of 96 bags.

Product details

• 0.9% Sodium Chloride Injection USP
• 100 mL container
• Reference: JB1302
• Sterile intravenous solution
• No preservative
• 4 bags per packet
• 96 bags per case

This product is for use by qualified healthcare professionals. Inspect the solution and container before use, and follow the official Baxter labelling for indications, storage, compatibility and administration. Do not use if the container or ports are damaged. See related medical supplies.

Baxter Sterile Water for Irrigation USP 1000mL | JF7624

This product is supplied for its stated clinical or care-use application. Confirm the configuration and compatibility requirements before ordering.

Product details

• Product type: Sterile Water for Irrigation
• Manufacturer: Baxter

Use according to the manufacturer's instructions and applicable clinical or safety procedure. Browse related medical supplies.

Addipak unit dose vial/flacons Unidos saline solution for inhalation.

• Color-coded red for easy identification
• Inverted milliliter graduations for accurate dispensing

Product Specifications

B. Braun 0.9% sodium chloride injection, 100 mL

This B. Braun 0.9% sodium chloride injection is a sterile, nonpyrogenic solution supplied as a 100 mL fill in a 150 mL PAB IV container. It contains no bacteriostatic or antimicrobial agents and is intended for professional clinical use as directed in its approved labeling.

Product details

• Manufacturer item: S8004-526400
• 0.9% sodium chloride injection
• 100 mL fill in 150 mL PAB IV container
• Isotonic, sterile, and nonpyrogenic
• Contains no bacteriostatic or antimicrobial agents
• DEHP/PVC free
• Latex free

Use only under an authorized prescriber's order and according to the product labeling. Inspect the container, solution clarity, expiry date, and compatibility requirements before use. Do not use a compromised container. Browse related medical supplies.

Baxter 0.9% Sodium Chloride Injection USP, 50 mL Mini-Bag, JB1301

Baxter 0.9% Sodium Chloride Injection USP is a sterile, non-pyrogenic 50 mL intravenous solution. Each 50 mL container contains 450 mg sodium chloride. This listing is supplied in packets of four bags or a case of 96 bags.

Product details

• 0.9% Sodium Chloride Injection USP
• 50 mL container
• Reference: JB1301
• Sterile and non-pyrogenic
• Each 50 mL contains 450 mg sodium chloride
• 4 bags per packet
• 96 bags per case

This intravenous product is intended for use by qualified healthcare professionals. Inspect the container before use and follow the official Baxter labelling for indications, compatibility, storage and administration. Do not use if the container or seals are compromised. See related medical supplies.

Omega 0.9% sodium chloride injection USP, 10 mL

Omega L0010001 is a preservative-free 0.9% sodium chloride injection USP supplied in a 10 mL presentation. It is an injectable clinical product for use only where indicated by its labeling and an authorized prescriber's order.

Product details

• Manufacturer item: L0010001
• 0.9% sodium chloride injection USP
• 10 mL presentation
• Preservative free
• Listed strength: 90 mg per 10 mL

Use only under appropriate clinical supervision and according to the approved product labeling. Before administration, inspect the solution and container, confirm the expiry date, and verify compatibility with the intended medication or procedure. Do not use a compromised container. Browse related medical supplies.

• Single dose poly ampoule with Luer Lock for easy dispensing
• Sterile
• Preservative Free
• Contains no antimicrobial or other added substance
• Quantity: 20 per Pack

Teligent Sterile Water for Injection Specifications

• Sterile Solution
•  For Intramuscular (IM), Intravenous(IV), Intratracheal (IT), or Subcutaneous (SC) use
• Sympathomimetic
• Preservative Free

Omega 0.9% bacteriostatic sodium chloride injection, 30 mL

Omega L0010003 is a 0.9% bacteriostatic sodium chloride injection supplied in a 30 mL injectable vial. This presentation contains preservative and is intended for professional clinical use where the product labeling and authorized order specify its use.

Product details

• Manufacturer item: L0010003
• 0.9% sodium chloride injection
• 30 mL vial
• With preservative
• Latex-free stopper
• Unit pack: 10 vials
• DIN: 00402249

Use only as directed in the approved product labeling and under an authorized prescriber's order. Review contraindications, compatibility, container integrity, solution clarity, and expiry date before use. This preservative-containing product is not interchangeable with preservative-free sodium chloride injection. See related medical supplies.