Brace and Support:

Lower leg orthosis: Comfortable walker for ankle and foot injuries – in a lightweight shell construction -Short 

Indications

• Postoperative: Post ligament reconstruction and/or refixation, for treatment of soft tissue injuries and tendon injuries
• Conservative: Ligament lesions 2nd and 3rd grade, tenosynovitis
• Stable foot and joint fractures: metatarsal fracture, talus fracture, malleolar fracture

protect.CAT Walker is lower leg brace. The product is exclusively to be used for the orthotic fitting of the foot and only on unbroken skin.

Product features

• Air system with medial and lateral air passage around the ankle and up to the forefoot   
• Air pump and ventilation valve for easy handling     
• Easy adjustment and removal of toe protector     
• Flat, rounded sole for natural, stable gait
• Contains Rigid Material

Intended purpose

Safe and effective immobilisation

Four strap system

Ensures high stability and reduces anterior talar shift

Available as optional extra: heel wedge sets for Achilles’ tendon rupture

Goal setting

Open the belts, loosen the front shin from the inner shoe and finally take the inner shoe out of the Walker.

Open the leg and foot part of the inner shoe by loosening the Velcro fasteners. Ask the patient to place his foot and lower leg into the inner shoe. Make sure that the air chambers are empty!

Close the inner shoe and make sure that it is firmly fixed to the patient's leg. Align the inner shoe in such a way that the integrated pump is sitting in the middle and so that later it fits into the space provided in the shin.

Now ask the patient to place their foot in the half shell of the Walker. The lower leg and foot should positioned so that they fit exactly into the shell.

Check to see that the foot is properly set and positioned in the Walker.

Make sure that the patient's toes are not pushing against the toe protector. If necessary, the toe protector's position can be adjusted or it can be removed completely.

Now place the loose front shin onto the patient's shinbone and foot. Make sure that the pump and ventilator fit into the spaces provided.

Close the belts to stabilise the system. Start by closing the belt at the front and then close all the other belts one after another. The belts should fit tightly.

Extra material can be cut away.

Ask the patient to walk around in the orthosis to make sure that the Walker is sitting properly.

To tighten the Walker's fit, the air cushions can be filled using the pump system. Adding or letting out air can be operated using the valve. The padded pieces can be used as additional padding.

Download Instructions to Use ( instructions for use protect.CAT Walker)

Lumbamed® facet is a medical lumbar support orthosis designed to relieve pain and stabilize the lower back, particularly targeting the facet joints of the lumbar spine. It is commonly prescribed for conditions involving facet joint osteoarthritis and other lumbar spine disorders.

Product features

Indications

Lower leg orthosis: Comfortable walker for ankle and foot injuries – in lightweight shell construction

Protection:
CAT Walker is a lower leg brace. The product is exclusively to be used for the orthotic fitting of the foot and only on unbroken skin.

Product Features

• Air system with medial and lateral air passage around the ankle and up to the forefoot   
• Air pump and ventilation valve for easy handling     
• Easy adjustment and removal of the toe protector     
• Flat, rounded sole for a natural, stable gait
• Contains Rigid Material

Intended purpose

• Safe and effective immobilization
• Four strap system
• Ensures high stability and reduces anterior talar shift
• Available as an optional extra: heel wedge sets for Achilles’ tendon rupture

Goal setting

• Open the belts, loosen the front shin from the inner shoe and finally take the inner shoe out of the Walker.
• Open the leg and foot part of the inner shoe by loosening the Velcro fasteners. Ask the patient to place his foot and lower leg into the inner shoe. Make sure that the air chambers are empty!
• Close the inner shoe and ensure it is firmly fixed to the patient's leg. Align the inner shoe in such a way that the integrated pump is sitting in the middle so that later it fits into the space provided in the shin.
• Now ask the patient to place their foot in the half shell of the Walker. The lower leg and foot should be positioned to fit exactly into the shell.
• Check to see that the foot is properly set and positioned in the Walker.
• Make sure that the patient's toes are not pushing against the toe protector. If necessary, the toe protector's position can be adjusted or it can be removed completely.
• Now place the loose front shin onto the patient's shinbone and foot. Make sure that the pump and ventilator fit into the spaces provided.
• Close the belts to stabilize the system. Start by closing the belt at the front and then close all the other belts one after another. The belts should fit tightly.
• Extra material can be cut away.

Ask the patient to walk around in the orthosis to make sure that the Walker is sitting properly.

To tighten the Walker's fit, the air cushions can be filled using the pump system. Adding or letting out air can be operated using the valve. The padded pieces can be used as additional padding.

Instruction Manual: Download Now

With the combination of the compressive knitted fabric and the integrated back rods, Lumbamed basic stabilizes the area of the lumbar spine and the border to the pelvis, without impairing muscular strength.

 Features:

• Stabilization of the lumbar spine area and the lumbosacral transition by means of 4 integrated dorsal spring ribs
  
  
• Reduction of lordosis of the lumbar spine by means of proprioceptive compression in the abdominal area
  
  
• Contains Semi-rigid material
  
  Purpose:
  
  
• With the combination of the compressive knitted fabric and the integrated back rods, Lumbamed basic stabilizes the area of the lumbar spine and the border to the pelvis, without impairing muscular strength. 
  
  
• The static forces in the vertebral column are improved and stress on the affected segments is reduced. This alleviates pain. Supports cause the greatest effect during physical exercise. In principle, the support can be worn all day.

The Tensorâ„¢ Tennis Elbow Support provides optimal support for tennis injuries.

Med Spec Tripod Wrist Lacer resists radial-ulnar deviation and controls flexion-extension. The Ulnar, palmar and dorsal aluminium stays work in concert to restrict radial-ulnar deviation and minimise flexion-extension of the wrist. The dual lace closure system allows for easy one handed application and can be adjusted with minimal effort. The polypropylene felt liner and perforated suede allows moisture to evaporate away from the skin to enhance patient compliance. The adjustable thumb strap permits unrestricted motion of the fingers and thumb. 

Sizing Chart: Measure Wrist Circ. 

• X-Small Fits: 4 3/4 - 5 1/2" 
• Small Fits: 5 1/2 - 6 1/4" 
• Medium Fits: 6 1/4 - 7" 
• Large Fits: 7 - 7 3/4" 
• X-Large Fits: 7 3/4 - 8 1/2" 

• Indications: carpal tunnel syndrome, wrist sprains and strains, post-operative immobilization and rehabilitation, stable fractures of the distal radius and carpal joints
• Constructed of sturdy, blue canvas material with foam tricot lining
• Wedge contour design ensures an intimate fit increasing patient comfort
• Extra-wide hook and loop strap closure at wrist for compression and support
• Removable and malleable palmar and dorsal stays
• Does not extend past the distal palmar crease allowing full finger range of motion

thumb support is ideal for carpal tunnel sprains, strains,
tendonitis immobilization. ideal brace for support of the wrist and thumb. will absorb shock and vibration with added thumb support.

Indications: • Thumb strains and sprains • Tendonitis of thumb • Arthritis of thumb • Skiers thumb

Sizing Guide:
Measurement taken at the largest part of the wrist:

X-Small: 5" & Below
Small: 5" - 6"
Medum: 6" - 7"
Large: 7" - 8"
X-Large: 8" - 9"
XX-Large: 9" - 10"

The lateral epicondylitis Brace is designed to help relieve tendon pain caused by irritation or inflammation. The compression pad on the forearm relieves tension on the tendon. The pressure is evenly distributed to promote comfortable use over a long period. It may be worn during housework, manual, and construction labor, or for clerical and computer tasks.

Characteristics

• Targeted pain relief
• Plastic reinforcement (insert)
• Used to prevent or to control the symptoms of tennis & golf elbow
• Long-term use
• Easy to use and adjust
• Velcro®-type adjustable closure
• Color: black

Indications

• Professional activities requiring repetitive hand movements
• Manual labor
• Bowling
• Golf

The new Wrist Lacer II provides equal tension across all four laces, offering supreme comfort, immobilisation and ease of application.

Lacer II Closure System

The unique lace closure design provides equal tension across all four laces to easily generate uniform compression for unparalleled support. The tension is easily adjusted for patients with unusual forearm and wrist circumferences.

Adjustability & Immobilization

The blue palmar pad offers enhanced support by matching the contour of the palm. The dorsal and palmar aluminium stays are removable to allow bending by medical professionals to create a custom fit.

Optimum Comfort

Indications:

• Carpal tunnel syndrome
• Wrist sprains or strains
• Postoperative care

Latex Free