B.Braun

Braun Lactated Ringer's Injection USP 1000mL | L7500

This product is supplied for its stated clinical or care-use application. Confirm the configuration and compatibility requirements before ordering.

Product details

• Product type: Lactated Ringer's Injection
• Manufacturer: Braun

Use according to the manufacturer's instructions and applicable clinical or safety procedure. Browse related medical supplies.

B. Braun IV Administration Set, 79 in., 15 Drops/mL, V1402

The B. Braun V1402 is a sterile primary gravity IV administration set with 79 inch tubing, a universal spike and SPIN-LOCK connector. It has a 15 drops/mL drip rate and a 14 mL priming volume.

Product details

• 79 in. (201 cm) tubing length
• 15 drops/mL drip rate
• 14 mL priming volume
• Universal spike
• SPIN-LOCK connector
• Primary gravity set without ports or filter
• Sterile and non-pyrogenic
• Not made with natural rubber latex
• Contains DEHP
• Available individually or in a case of 50

IV administration equipment must be selected, primed and used by trained healthcare professionals following the clinical protocol and manufacturer instructions. Confirm fluid and equipment compatibility before use. Browse medical supplies.

B. Braun 0.9% Sodium Chloride Injection USP, 250 mL, L8002

B. Braun 0.9% Sodium Chloride Injection USP is a sterile, non-pyrogenic, isotonic solution supplied in a 250 mL EXCEL container. Each 100 mL contains 0.9 g sodium chloride in Water for Injection USP. The product is available as an individual bag or in a case of 24 bags.

Product details

• 0.9% Sodium Chloride Injection USP
• 250 mL EXCEL container
• Reference: L8002
• Sterile, non-pyrogenic and isotonic
• Not made with natural rubber latex, PVC or DEHP
• Available as one bag or a case of 24

This intravenous solution is intended for use by qualified healthcare professionals. Do not use when the solution is not clear or the container or seals are damaged. Refer to the official product labelling for complete use, storage, compatibility and safety information. See related medical supplies.

B. Braun IV Administration Set, 85 in., 15 Drops/mL, V1501 / 352601

This B. Braun IV administration set is a sterile primary-infusion set with an 85 inch tube, universal spike and SPIN-LOCK connector. The set has a 15 drops/mL drip rate and a 13 mL priming volume.

Product details

• 85 in. (216 cm) tubing length
• 15 drops/mL drip rate
• 13 mL priming volume
• Universal spike
• SPIN-LOCK connector
• Roller clamp and slide clamp
• Sterile and non-pyrogenic
• Not made with natural rubber latex or DEHP
• Available individually or in a case of 50

IV administration equipment must be selected, primed and used by trained healthcare professionals following the applicable clinical protocol and manufacturer instructions. Confirm compatibility with the intended infusion system before use. Browse related medical supplies.

B. Braun 0.9% Sodium Chloride Injection USP, 1000 mL, L8000

B. Braun 0.9% Sodium Chloride Injection USP is a sterile, non-pyrogenic, isotonic intravenous solution in a 1000 mL EXCEL container. Each 100 mL contains 0.9 g sodium chloride in Water for Injection USP. It is supplied as a single-dose container for intravenous use.

Product details

• 0.9% Sodium Chloride Injection USP
• 1000 mL EXCEL container
• Reference: L8000
• Sterile, non-pyrogenic and isotonic
• Single-dose container
• Not made with natural rubber latex, PVC or DEHP

This is an intravenous product for use by qualified healthcare professionals. Use only if the solution is clear and the container and seals are intact. Refer to the official product labelling for indications, warnings, storage, compatibility and administration requirements. Browse other medical supplies.

B. Braun 0.9% sodium chloride injection, 100 mL

This B. Braun 0.9% sodium chloride injection is a sterile, nonpyrogenic solution supplied as a 100 mL fill in a 150 mL PAB IV container. It contains no bacteriostatic or antimicrobial agents and is intended for professional clinical use as directed in its approved labeling.

Product details

• Manufacturer item: S8004-526400
• 0.9% sodium chloride injection
• 100 mL fill in 150 mL PAB IV container
• Isotonic, sterile, and nonpyrogenic
• Contains no bacteriostatic or antimicrobial agents
• DEHP/PVC free
• Latex free

Use only under an authorized prescriber's order and according to the product labeling. Inspect the container, solution clarity, expiry date, and compatibility requirements before use. Do not use a compromised container. Browse related medical supplies.

B. Braun Secondary IV Administration Set, 40 in., 15 Drops/mL, V1921

The B. Braun V1921 is a sterile secondary IV administration set with 40 inch tubing, a universal spike, a roller clamp, SPIN-LOCK connector and plastic bag hanger. It has a 15 drops/mL drip rate and an 8.8 mL priming volume.

Product details

• 40 in. (101.6 cm) tubing length
• 15 drops/mL drip rate
• 8.8 mL priming volume
• Universal spike and roller clamp
• SPIN-LOCK connector
• Plastic IV bag hanger
• Sterile, DEHP-free and latex-free
• Available individually or in a case of 50

IV administration equipment must be selected, primed and used by trained healthcare professionals following the clinical protocol and manufacturer instructions. Confirm fluid and equipment compatibility before use. Browse medical supplies.

B. Braun Sterile Water for Injection USP, 500 mL, L8501

B. Braun Sterile Water for Injection USP is a clear, sterile, non-pyrogenic and hypotonic solution in a 500 mL EXCEL container. It contains no bacteriostatic or antimicrobial agent and is intended as a diluent or solvent for parenteral preparations.

Product details

• Sterile Water for Injection USP
• 500 mL EXCEL container
• Reference: L8501
• Clear, colourless and odourless solution
• Sterile, non-pyrogenic and hypotonic
• No bacteriostatic or antimicrobial agent
• Not made with natural rubber latex, PVC or DEHP
• Available individually or in a case of 24

Do not inject until the solution has been made approximately isotonic with an appropriate solute. This product is for qualified healthcare professionals using aseptic technique and the official product information. Inspect the container before use. See related medical supplies.

BBraun Lactated Ringer's Injection USP 250mL | L7502

This product is supplied for its stated clinical or care-use application. Confirm the configuration and compatibility requirements before ordering.

Product details

• Product type: Lactated Ringer's Injection
• Manufacturer: Braun

Use according to the manufacturer's instructions and applicable clinical or safety procedure. Browse related medical supplies.

B. Braun 0.9% Sodium Chloride Injection USP, 50 mL, S8004-538400

B. Braun 0.9% Sodium Chloride Injection USP is a sterile, non-pyrogenic, isotonic intravenous solution supplied in a 50 mL container. It contains no bacteriostatic or antimicrobial agent.

Product details

• 0.9% Sodium Chloride Injection USP
• 50 mL container
• Sterile, non-pyrogenic and isotonic
• No bacteriostatic or antimicrobial agent
• Not made with latex, PVC or DEHP
• Reference: S8004-538400
• Available individually or in a case of 84

This intravenous product is for use by qualified healthcare professionals. Use only if the solution is clear and the container and seals are intact. Refer to official product labelling for indications, storage, compatibility and administration. Browse medical supplies.

BBraun Lactated Ringer's Injection USP 500mL | L7501

This product is supplied for its stated clinical or care-use application. Confirm the configuration and compatibility requirements before ordering.

Product details

• Product type: Lactated Ringer's Injection
• Manufacturer: Braun

Use according to the manufacturer's instructions and applicable clinical or safety procedure. Browse related medical supplies.

Braun Sterile Water for Injection USP 1000mL | L8500

This product is supplied for its stated clinical or care-use application. Confirm the configuration, compatibility, and intended use before ordering.

Product details

• Product type: Sterile Water Injection
• Manufacturer: Braun

Use according to the manufacturer's instructions and applicable procedure. Browse related Sterile Water Injection.

This extension set is designed to help prevent catheter dislodgement while ensuring secure and easy connections. Featuring a slide clamp and SPIN-LOCK® connector, it supports reliable fluid management in clinical settings.

Key Features:

• Helps reduce risk of IV catheter dislodgement
• Slide clamp for controlled flow
• SPIN-LOCK® connector for secure attachment
• Made from PVC (DEHP-free, contains BPA)
• Sterile and latex-free
• SKU-  474921

Universal Spike (15 drops/mL), Backcheck Valve, CARESITE® Valve Injection Sites 68 in. and 6 in. above Distal End, Roller Clamp, SPIN-LOCK® Connector. DEHP-free, Latex-free. Priming Volume: 15.0 mL, Length: 84 in. (210 cm)

Specifications

Braun 5% Dextrose & 0.9% Sodium Chloride Injection (500mL) - L6101

This product is supplied for its stated clinical or care-use application. Confirm the configuration and compatibility requirements before ordering.

Product details

• Product type: Dextrose Sodium Chloride Injection
• Manufacturer: Braun

Use according to the manufacturer's instructions and applicable clinical or safety procedure. Browse related medical supplies.

B. Braun 0.45% sodium chloride injection, 500 mL

This product is a 0.45% sodium chloride injection in a 500 mL presentation. The listing is supplied as one case of 24 units and identifies manufacturer item L8021. It is a clinical fluid product that should be selected and administered only by qualified healthcare professionals.

Product details

• 0.45% sodium chloride injection
• 500 mL per unit
• Manufacturer item: L8021
• Case quantity: 24 units

Use only as directed in the product labeling and under an authorized prescriber's order. Verify the container, solution clarity, expiry date, and compatibility requirements before use. Do not use a compromised container. Browse related medical supplies.

Fluid Dispensing Connector Green | 415080/FDC1000

This product is supplied for its stated clinical application. Confirm the configuration, compatibility, and intended use before ordering.

Product details

• Product type: IV Tubing Connectors
• Manufacturer: Braun

Use according to the manufacturer's instructions and applicable procedure. Browse related IV Tubing Connectors.

• Passive Safety Needle Shield slides into place as needle is pulled out of catheter: Aids in prevention of needlestick injuries
• Universal Bevel
• 22G x 1" (0.9 x 25 mm)
• SKU- 4251128-02

Universal Spike (15 drops/mL), Backcheck Valve, CARESITE® Valve Injection Sites 85 in., 41 in. and 6 in. above Distal End, Roller Clamp, Slide Clamp, SPIN-LOCK® Connector. DEHP-free, Latex-free. Priming Volume: 20.0 mL, Length: 112 in. (284 cm)

Specifications